Reniso Ultracool 68 Is Used For Ammonia Refrigeration Plants With Deep Evaporation Temperatures Down To < -45 °c. Due To Its Thermal Stability, Reniso Ultracool 68 Avoids The Formation Of Oil Deposits And Sludge In The Compressor. According To This, Maintenance Costs Of The Refrigeration Plant (filter Replacement, Inspection Work Etc.) Can Be Considerably Reduced. Reniso Ultracool 68 Shows An Outstanding Low Evaporation Rate Which Is Significantly Lower Than That Of Conventional And That Of Hydro Treated Mineral Oils. In Practice, This Means That There Is Less Oil Loss In The Compressor (lower Oil Carry-over) Which Ends Up In Lower Oil Top-up Volumes. This Is Also An Important Point With Regard To Cost Savings In The Refrigeration Plant. Reniso Ultracool 68 Combines The Very Good Cold Flow And High Temperature Properties Of Synthetic Hydrocarbons With Good Elastomer Properties (good Compatibility With Cr Sealants) As They Are Only Known From Mineral Oil Products.reniso Ultracool 68 Is Nsf H2 Registered.viscosity Grade: Iso Vg 68...
Steel grit is an angular metallic abrasive produced by crushing bearing steel. steel grit is used for descaling,coating and corrosion removal, and surface etching. the angular particle shape provides a fast cleaning rate and an angular surface profile.steel grit is tempered to three different hardnesses. the hardest material, gh, is designed for use exclusivelyin air blasting equipment,stone cutting. the two softer materials, gl and gp, may also be used in centrifugal wheel blast equipment.steel grit application:steel grit blasting cleaning:steel shot and grit are used in cleaning applications for removal of loose material on metal surfaces. this type of cleaning is common in automotive industry (motor blocks, cylinder heads, etc.).steel grit stone cutting:steel grit is used in cutting hard stones, such as granite. the grit is used in large multi-blade frames which cut the blocks of granite into thin slices. sae j444 sizes:g10 g12 g14 g16 g18 g25 g40 g50 g80 g120steel grit specification:shape : angularhardness :gp:42 ~ 50hrc;gl:56 ~ 60hrc;gh:63 ~ 66hrcdensity : 7.4 g/cm3durability : >3000 timescertificate iso9001,saej444,sgschemical composition:cr 0.60-1.60%c 0.70 -1.20%mn 0.6 -1.20%si 0.40 -1.20%s ...
Steel grit is an angular metallic abrasive produced by crushing bearing steel. steel grit is used for descaling,coating and corrosion removal, and surface etching. the angular particle shape provides a fast cleaning rate and an angular surface profile.steel grit is tempered to three different hardnesses. the hardest material, gh, is designed for use exclusivelyin air blasting equipment,stone cutting. the two softer materials, gl and gp, may also be used in centrifugal wheel blast equipment.steel grit application:steel grit blasting cleaning:steel shot and grit are used in cleaning applications for removal of loose material on metal surfaces. this type of cleaning is common in automotive industry (motor blocks, cylinder heads, etc.).steel grit stone cutting:steel grit is used in cutting hard stones, such as granite. the grit is used in large multi-blade frames which cut the blocks of granite into thin slices. sae j444 sizes:g10 g12 g14 g16 g18 g25 g40 g50 g80 g120steel grit specification:shape : angularhardness :gp:42 ~ 50hrc;gl:56 ~ 60hrc;gh:63 ~ 66hrcdensity : 7.4 g/cm3durability : >3000 timescertificate iso9001,saej444,sgschemical composition:cr 0.60-1.60%c 0.70 -1.20%mn 0.6 -1.20%si 0.40 -1.20%s ...
ALGERIA YELLOW PAGESONLINE 
