Waterproofing Injection packers Keiser

Keiser injection packers: Keiser injection packers for successful low and high pressure crack injection. Keep in mind, however, that the type of epoxy or polyurethane used and the time required for injection will vary with each job depending on the crack width, wall thickness, and other conditions. These can be bought at OTAL LLC, that some with all the tools and supplies needed for the project. The are available in different sizes and shapes.

Normally the procedure is in the following steps

Install injection ports

Seal the surface

Remove the ports

These are used in ceiling, floor and wall, But there are different ways of application and different procedures and time involved according to the place of injection. The size type and length also depend on the type of the job. Consult OTAL LLC for better assistance.