Monoflange Block & Bleed Valve

The Kalpataru Piping Solutions range of mono flange valves are specially designed to be installed directly onto your process hardware. The monoflange can be utilized for the immediate connection of pressure instrumentation where there is an ASME/ANSI integral flange present. They can likewise be "sandwiched" between sets of gear to fulfill different plan necessities of the framework. The "single piece" integral design, used in place of flange adapters and separate valves, will lessen the quantity of potential hole ways while making your framework significantly more minimal.

Further advantages will be achieved in significant weight and component cost savings when compared to other conventional installation solutions. Monoflanges can be configured as either single block and bleed, or double block and bleed; with a plugged vent port for the bleed.

Temperature Rating : -54°C to 232°C with PTFE packing Up to 426°C with optional Graphoil Packing.

Pressure Rating : 6000 PSI (414 bar) at 100°F (38°C).

Available in : SS304L and SS316L, Pipe to Flange, Flange to Flange.

Test Certificate : 100% factory tested, Heat code traceability.

• Non Rotating Stem tip.

• Material thickness to ANSI B16.34.

• ANSI B16.5 flanged inlet connection 1/2'' to 2" Sizes 150lbs rated to 2500lbs rated.

• Drain port size- 1/2".

APPLICATIONS :

1. Chemical injection.

2. Process to instrument interface.

3. Gas or light liquid service.